Before removing the bumper, the taillights must be removed.
1 – Bolts
- 1.5 Nm
2 – Rear bumper - To remove, unscrew screws -1- in the wheel arch liner, screws -3- under the protective strip, and screws -5- from the bracket -6-.
- First, release the bumper from the outer guide element and then backing out of the inner guide element.
3 – Bolt - Removing cover plate
- 2.5 Nm
4 – Guide element, the inner guide element
5 – Bolt - 2.5 Nm
6 – Holder
7 – Wheel arch cover
